About: My name is Britt Michelsen. Ns am a chemical engineer from Germany particularly interested in computational liquid dynamics. To balance every the theoretical work, I like to do stuff in my cost-free time an ext About BrittLiv »


You are watching: What is the name of the feather duster in beauty and the beast

In this instructable, i will show you how to do two different versions the the feather duster native Beauty and the Beast that can be supplied for cleaning.

You might be wondering why i am not using her surname in the title. The trouble is the she wasn"t provided a name in the original Disney movie. She is dubbed Marie (in the comics), Babette (in the musical and House of Mouse), Plumette (in the 2017 live-action remake), and also Fifi (in the midquel movie Beauty and also the Beast: Belle"s magical World). Even though the prequel is nowhere close to as great as the initial movie, we space going to contact her Fifi in this instructable. Mainly because (in comparison to the various other adaptions) she watch the exact same as in the initial movie.

After the town hall Beauty and the Beast for the about hundredth time i felt really inspired and also wanted to bring her come life. I absolutely execute not choose cleaning and never believed that a cleaning utensil could bring me so much joy, however I for sure love it and also hope you do, too.

So let"s get started.

*


Add TipAsk QuestionCommentDownload

Supplies


Materials

Filament Swiffer (I offered this one) or a smaller sized ostrich feather duster (like this* one) Optional (for smoothing): Filler inside wall (e.g. This* one) and wet sandpaper (e.g. This* one) primer (I supplied this* one) repaint (white, black, gold, or brass (i supplied this* one), red (for the lips), grey, and also brown) glue 2 mm object (at least 16 centimeter long) finish (+ optional one anti-shine spray paint. Ns am using this* one) Masking tape, as soon as you are going through the feather one

Tools

3D press Paintbrushes and optional one airbrush utility knife saw (If you room going to use ostrich feather duster)

* Affiliate link. Ns earn native qualifying purchases. Many thanks a lot for the support!


Add TipAsk QuestionCommentDownload

Step 1: The Design


*

I went into Inkscape (it is a complimentary program, friend can uncover it here), included a snapshot from the movie and also one native the head, and also drew the outlines. I likewise scaled the pieces to a dimension that would certainly fit the feathers and also the Swiffer.

There are different programs you deserve to use to rotate the sketch right into a 3D model. I normally use Fusion360. Simply enter the "Design" workspace, pick "INSERT", "Insert SVG", "Insert from mine computer", select the right paper and then pick a plane. Sadly, usually, the component isn"t scaled right.

The Autodesk aid says: "SVG units are screen units, i.e. Pixels. A 1:1 mapping of an SVG paper into fusion 360 will certainly not be achieved unless the SVG translator support mapping logical systems (in, mm, cm, etc.) to display units (pixel dimensions, which differ on the used OS and its version). Also with the systems being collection in the third-party software, the values will it is in converted right into points by saving. The dimension of a point is device-dependent and application-dependent."

Luckily this can conveniently be fixed. Merely measure the imported component by picking "INSPECT" and also clicking on the top and bottom lines. As you deserve to see in the second picture, in my instance it is 32.444 mm. Since it is supposed to be around 123 mm, I must use a scaling aspect of about 3.79 (123 mm / 32.444 mm).

Simply click on "FINISH SKETCH" (you have the right to delete the later) and also reimport the SVG paper ("INSERT", "Insert SVG"). Then usage the scaling aspect in "Scale airplane XY" (it may be dubbed differently relying on the plane you have actually selected), favor I am mirroring in the 2nd picture. Before finishing the sketch, you will have to include a line in the middle above the sketch and one the goes through the center of the sketch.


Add TipAsk QuestionCommentDownload

Step 3: Finishing the Handle


*


Add TipAsk QuestionCommentDownload

Step 10: painting the Handle


If girlfriend look at the illustrations of Fifi, you can see the there isn"t any an are for the quills the the feathers, which is required in real life. I chose to repaint the bottom that the handle black to hide the it required to be means longer than in the movie.

Once ns was done airbrushing it and placed it onto the feathers, ns realized that black was too dark and also didn"t look at good. So, I had to usage masking tape again and also went v a dark brown, as you can see in the 3rd picture. I am happy i repainted it since it looked a lot better.

Don"t forget to repaint the gold rings.

You don"t must paint the bottom that the Swiffer handle, but the ring at the top and the bottom should be painted golden.


Add TipAsk QuestionCommentDownload

Step 11: using the Finish


The mob cap is smoothed the same means as the various other parts. Girlfriend don"t have to worry about its inside since it can"t be seen later (As you can see, mine is still really rough).

Once it is smoothed, just spray repaint it white and also paint the inside of the brim grey, as presented in the first picture.

In the second picture, you deserve to (once again) watch the difference between a complete without (left) and also with (right) an anti-shine layer.

Once the end up is done, reduced the 2 mm thread come a length of about 16 cm. Ar it through the holes and also tie a node on the inside. Make sure that the can"t come loose, due to the fact that you won"t have the ability to fix the later. I provided a square knot.


Add TipAsk QuestionCommentDownload


See more: 2 Out Of 18 Is What Percent Of 18 Is 2 Is What Percent Of 18? = 11

Step 13: Glueing


Now all the is left to perform is to glue everything together.

Start by gluing the mob cap to the head, however be careful due to the fact that there is a direction and also if girlfriend don"t gain it right, that won"t be sitting on the head properly.

Next, we room going to adhesive the handle to the head. Together you deserve to see in the 3rd picture, the top and also the underside that the Swiffer watch different. So, friend will have to decide, i beg your pardon one girlfriend would prefer to show. I decided to use the underside as the front. Make sure you save your decision in mind while gluing the pieces together.

As you have the right to see, I supplied a most glue to adhesive the feathers to the handle. Make sure that there is sufficient contact between the glue and the 3D-printed part.