Pex has a smaller sized inside diameter than copper. Why did pex manufactors decide that the outside diameter was more important 보다 the within diameter?
*

Re: importance of CTS?I think the best means to number out the answer to your inquiry would be to contact a PEX manufacturer, otherwise one would just be guessing.

You are watching: What does cts mean in plumbing


*

*

Join Date: Sep 2007Posts: 4091City, State:Northern Kentucky/Greater Cincinnati AreaOccupation: -Master Plumber/Entrepreneur
Pex has a smaller sized inside diameter 보다 copper. Why go pex manufactors decide that the external diameter was more important 보다 the inside diameter?
since in order for PEX to it is in competitive and commingle effectively with copper, it has to have the ability to mate size for size in bespeak to achieve that. The inside diameter is lessened given the structural quality that is required to preserve effectiveness. IOW, They"ll never ever make PEX together thin as copper together it will certainly not carry out to accomplish most codes.
north Kentucky Plumbers
Twitter Feed | Plumbing Videos
*

Re: importance of CTS?My assumption: v is that PEX morphed native tubing. Typical plastic and steel pipe as offered as wait lines etc. In industrial devices has always been sized in OD x wall surface thickness. This method you deserve to use the very same fittings because that thick or thin wall. Ns realize that pipe is the same method - the i would of 80 is less than the id of 40, both with exact same OD, but for some reason (my assumption: v is different groups set the requirements years ago) pipe has constantly been sized in in the name OD v the fractional size being the standard.
Re: prestige of CTS?To complement the drillbits.
*
I can"t psychic the password but at once the minimum supply because that a structure right here was 3/4" v a schematic showing that the i would cross-hatch of pipeline and fittings must it is in a minimum that 3/4" i m sorry 3/4" PEX can not do. Meaning, that course, that every main supply in PEX have to be a minimum that 1". Including the main shutoff. I constantly wondered how & why this was overlooked as I see 3/4" PEX mains every the time.
*
J.C.
What carry out all them markings mean?PEX pipe Markings
In the U.S., PEX tubing will certainly bear several of this marks: Manufacturer"s name and product name. NSF-61. This mark shows that the pipe meets NSF/ANSI conventional 61 for health and wellness requirements. NSF pw. This mark indicates that the pipe meets both NSF-61 and also NSF/ANSI conventional 14 for performance, strength and quality control. NSF rfh. This mark suggests that the pipe just meets criter for radiant floor heating. ASTM F876 and F877. these marks suggest that the product meets demands for size and capability to resist pressure and temperature. CSA B137-Series 5. This is the Canadian tantamount of the over U.S. Standards. CTS-OD. Copper tubing Size, exterior Diameter Controlled. This means that the PEX tubing"s exterior diameter is produced to it is in the very same as the external diameter of the very same size copper tube. SDR 9. Standard measurement Ratio. Refers to the thickness the the PEX pipe wall. This is the traditional PEX thickness, where the wall surface is 1/9th that the outside diameter that the tube.

See more: Which Of The Following Is A Unit Of Heat Energy? ? What Is The Si Unit Of Heat

ASTM F876 standard Specification because that Crosslinked Polyethylene (PEX) tube ASTM F877 typical Specification for Crosslinked Polyethylene (PEX) Plastic Hot- and Cold-Water circulation Systems ASTM F1281 standard Specification because that Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene (PEX-AL-PEX) press Pipe ASTM F1807 conventional Specification for steel Insert Fittings utilizing a Copper Crimp Ring because that SDR9 Cross-linked Polyethylene (PEX) TubingASTM F1960 standard Specification for Cold expansion Fittings with PEX Reinforcing Rings because that Use with Cross-linked Polyethylene (PEX) tube ASTM F2023 typical Test method for examining the Oxidative Resistance of Cross-linked Polyethylene (PEX) Tubing and also Systems to hot Chlorinated Water. ASTM F2080 traditional Specification for Cold-Expansion Fittings with steel Compression-Sleeves for Cross-linked Polyethylene (PEX) pipeline ASTM F2098 traditional Specification because that Stainless stole Clamps because that Securing SDR9 Cross-linked Polyethylene (PEX) pipe to steel Insert Fittings see http://www.pexinfo.com/#tubing for more.
"It"s a table saw, carry out you know where her fingers are?" ? Bob D. 2006"?ǝɹɐ sɹǝƃuıɟ ɹnoʎ ǝɹǝɥʍ ʍouʞ noʎ op `ʍɐs ǝlqɐʇ ɐ s,ʇı"https://www.youtube.com/user/PowerToolInstitutehttps://www.youtube.com/channel/UC1p...qcZKHyrqKhikFA----