About: Roarockit supplies the technology, tools and materials to build custom skateboards and other bent hardwood projects. Us work carefully with colleges to integrate board building programs right into the classroom, and assist ans… much more About Rockitalk »

This Instructable is an extension of ours 55" Longboard Dancer tutorial wherein we prove the procedure involved through laminating a board longer than the typical 48" long skateboard veneers. In that tutorial you may have actually noticed that the height side of the deck had a distinctive grip ice cream pattern... Well, this is just how we did it!

TOOLS:

File

Sharp utility Knife

Tape

MATERIALS:

Grip ice (we used 9" vast Jessup street deck grip)

Image (printed to the size you desire it transferred to your grip tape)


*
*
*
*

To grip such a unique handmade longboard, we necessary something much more than just the median solid tight tape task on the optimal side of the deck. We determined to reduced out a tiny design that would certainly let the organic maple veneer display through the grip itself. Sticking v the "dancer" theme, we uncovered a silhouette image of a round room dancer in a optimal hat because that our design.

You are watching: How to cut grip tape without a razor

We reduced a size of grip tape at 20" lengthy to apply our image to. This will end up in the center of the deck and also is a nice short piece to job-related with.

After taping our photo to the back (paper) next of the tight tape, we begin cutting out the locations we want the lumber to show through.

**Remember to winter (or flip) your image prior to printing if you want it come align a certain method on the grip. Since you room cutting your image from the back side of the grip, any kind of image will present up in the reverse when it has actually been applied to the deck. This is specifically important if friend have any text you desire to cut out.


*
*
*
*
*
*

Cutting native the back side that the tight tape is always easier 보다 from the prior side. It might take a bit more thinking to visualize what it will certainly look choose in the end, however it is much faster to cut and won"t dull her knife as quickly as cutting the rough top side of the grip.

Using the printed picture as a guide, we were maybe to reduced out this straightforward design in around 10 minutes through the energy knife. Grip tape art can get pretty intricate if you desire it come be, so acquisition your time through the knife throughout this step is important.

Make certain to keep any kind of interior pieces that you may need to reduced out and stick later. Because that example, the within of the letter "O" or "A"


*
*
*
*
*
*
*
*
*
*
*
*
*

Peel the file backing off of the grip tape, and carefully pole the sheets in place on the deck. Grip tape is quite tacky, so it can be daunting to re-position a item if it it s okay stuck in the dorn spot.

When laying down the areas of grip that space intricately reduced out, be extra cautious when peeling and also sticking those parts to make sure they room in the best position and also do not rip.

TIP: If girlfriend still have the offcuts indigenous the design you cut out indigenous the grip, you have the right to use these sections come make sure your image is correctly positioned. Merely lay the offcut item in the open up area of grip, and also check to see if it lines up. You can also use this cheat to aid position those interior pieces that need to stuck under to finish the image. ***See image notes


*
*
*
*
*
*

Before you start cutting off the excess tight tape from her deck, another good tip is to make certain your ice is pressed under firmly by rojo an old wheel over the surface. This helps acquire out any small bubbles or locations that might not be completely stuck come the deck.

Once the grip is pressed down firmly, you can take a paper and begin breaking the edge of the tape prior to cutting. You have the right to use a file, or pretty much any straight metal tool (shaft that a screw driver, leader edge, etc), and run it along the edge of your board on top of the grip. This will assist remove some of the grit in this area which create a scoring line for your blade.


*
*
*
*
*

Once you have actually the edges scored, you deserve to use the energy knife to reduced off the excess grip tape.

Extend the tongue out and also run it along the leaf of the plank from the bottom side. This will act as a overview for her knife edge come smoothly run about your plank while cutting at the exact same time.

See more: What Is The Name Of The Enormous Canadian Bay That Almost Divides Canada In Two

TIP: You have the right to fold up and use a small section that the tight tape offcut to aid smooth out any type of uneven edges about your deck. It is pretty conventional to have locations that may not have actually been reduced as cleanly together the rest, and this can aid fix that problem.


After the surface ar of her deck has been extended by the fixed tape, you will most most likely need come punch out the feet for your truck bolts. The easiest means to execute this is come poke a pilot hole with the grip from the bottom next of the deck. This will enable you to quickly see where the van holes space from the optimal side that the board, and you deserve to then use a file, knife, countersink little or the van bolts us to eliminate the rest of the material.

You want a clean truck feet so that once you are ready to mountain the trucks, you are able to press the bolts through fairly easily.


Your plank is now completely gripped and ready come ride!

Hopefully this tutorial helps define the basic principles that gripping your own skate/longboard and cutting the end a unique design to make it that much an ext custom.