Gorilla bring away epoxy come the Gorilla tough level. V its superior solvent and water resistance, Gorilla Epoxy adhesive is incredibly solid and long lasting for household and also automotive repairs alike. The easy-to-use syringe keeps the epoxy resin and hardener separate, so it is simple to dispense. The two-part, gap-filling formula quickly bonds steel, aluminum, glass, wood, ceramic, tile and also most plastics. Plus, the dries in an ideal, clear end up that makes projects look spotless.

You are watching: Does gorilla glue work on aluminum



DRIES CLEAR: ideal for clean, easy finishing5 MINUTE SET: plenty of re-positioning time for the perfect fit.GAP-FILLING: filling voids and also bonds uneven and vertical surfaces.WATER RESISTANT: Withstands center exposure come waterSOLVENT RESISTANT as soon as CUREDEASY-TO-USE SYRINGE: separate barrels the epoxy resin and also hardener save epoxy native hardening, plus syringe dispenses evenly and also includes a cap for many uses.

1. Prepare Your work-related Area and also the SurfaceIf you’re using Gorilla Epoxy because that the first time, or bonding a new form of material, we constantly recommend do the efforts a test item first.

Prepare your work area: it is recommended to usage Gorilla Epoxy in a well-ventilated area. Be sure your job-related area is protected from spills. Gather your mixing tray and also stir pole so the all your provides are together.

Prepare the surface: To improve adhesion, roughen smooth surfaces prior to gluing. Then clean and also dry all surfaces to be bonded.

2. Mix Gorilla EpoxyRemove the black cap native the 2 syringes. With reminder pointing upward, cut or snap the end from pointer of the syringes. With the reminder still pointing upward, eliminate air and also ensure even dispensing by progressively pushing the plunger till both the resin and the hardener room at the tip.

Push the plunger to dispense even quantities of resin and hardener onto a clean, disposable, consisted of surface. The package itself have the right to be used as a mixing tray. If you flip the plastic blister shell over, you deserve to use the tiny well as a starter food to start dispensing till both the resin and hardener room flowing equally. Once the circulation is even, relocate to the larger mixing well to dispense your also ratio.

Mix the two components for about 20 seconds, till the mixture is uniform. Apply within 5 minutes.

As friend mix, you will notification that the epoxy warms up. This is a reaction that occurs together the resin and hardener combine.

3. ApplicationAfter mix is complete, use Gorilla Epoxy within 5 minutes. The epoxy mixture will proceed to thicken and also the bond toughness will decrease the longer you wait come apply.

4. ClampingTo reach maximum bond strength, clamp job together and also leave undisturbed.

See more: Where'S The Playground Susie Meaning, Where'S The Playground Susie

Important cure TimesSet: 5 minutes to apply and position

Handling: enable to cure for 30 minutes undisturbed (no load or handling)

Final Cure: permit 24 hrs for load-bearing weight

Storage: to close, pull plunger contempt back. Wipe tip clean through dry cloth and align notch on tip and also cap. Near tightly.