ns stupidly purchase a 5-gallon bucket of untinted "deep" inner base repaint thinking that I might paint wall surfaces white with it. Just after putting about two gallons ~ above the walls and letting it dried did i realize the although the paint is white once wet, that is almost translucent once it dries, and I should have had the base tinted prior to applying. The old paint color bleeds through, even after lot of coats.

So I"ve learned mine lesson about untinted bases. My concern is whether I have the right to now simply paint over the walls through a appropriately tinted paint. Is there any type of reason why not?

Secondarily, is over there anything I deserve to do to rescue the ~3 gallons of untinted basic that ns have? It was expensive, high-quality paint and I"d dislike to waste it. The repaint store claimed they can"t color partially full buckets. Have the right to I color it in any other way? I"m not certain about the color as lengthy as it is whitish.




You are watching: Can you use base paint without tinting

paint
re-superstructure
enhance this concern
follow
edited may 17 "19 at 2:08
painter48179
asked may 17 "19 in ~ 1:01
*

painter48179painter48179
7611 gold badge11 silver badge66 bronze badges
2
add a comment |

1 answer 1


energetic oldest Votes


See more: Can Hamsters Eat Sunflower Seeds With Salt, Can I Feed My Hamster Salted Sunflower Seeds

7
Yeah, I"m afraid you blew it. Appropriate idea, dorn base.

Paint is make in several levels the base. A white base which has lots and also lots the white tint, and also is intended come have little amounts of color added, to ultimately create an off-white. A medium base has actually less white tint and is intended to make much more colorific colors favor pastels (most architecture coatings room pastels or off-whites). And also a deep base has actually no white tint at all, and is intended to be entirely colored by the squirts of shade from the tinting machine. This is to enable deep and also high-impact colors such as

*
src

What"s more, deep bases are expected to use a lot the squirts the pigment from the carousel. Those pigments aren"t cheap, for this reason they up the price top top the presumption they"ll be offering you a the majority of pigment. Also, they leaving extra room in the can for all that pigment, for this reason to add insult come injury, you get less paint.

So what you have actually there is efficiently varnish.

How do you resolve it? Well, girlfriend may notification that the colours carousel in ~ the hardware keep doesn"t have any kind of white pigment. The white pigment come in the white or medium base cans. That is not feasible for the paint shop to rotate a deep base right into white.

You might shot buying part titanium dioxide pigment and also seeing if you can pigment-load the base. It"s no terribly expensive; it"s worth part experimentation. Due to the fact that you space only utilizing one pigment, there"s a fair chance the color will complement even with different ratios of basic to pigment.

Your other alternative is come buy a gallon or quart the the same stuff, and measure exactly exactly how much repaint is actually in the can. Then meter the end your 5-gal., putting specifically that lot paint into new cans. They should have the ability to tint that, however it"ll have to be a bold color.

*

... And also in the future, even out your surfaces with primer. It"s draft to make unequal surfaces equal... And it"s cheaper. Use primer to avoid bleed-through, not paint.