Is it a manufacturing facility alarm? If so, the only thing you can do is turn the key to the run position and also let the sit for about 10+ minutes. That means it have to start. Also, if that is a element alarm, you should take it come a dealer to have actually it repaired. They space the only ones with the suitable test devices to recognize the problem.Please monitor this guide. Https://www.charline-picon.com/articles/how-to-reset-a-security-systemJoe


You are watching: 2000 buick lesabre security light stays on


electrical problem1997 Buick Lesabre 6 cyl former Wheel drive Automatic The alarm system will sometimes go off intermittently while sitting in the driveway. The other problem deals v the defense light. As soon as the car is in drive, the protection light will appear on the dash and also blink or continue to be on for several minutes. Go the alarm system need to be reset, or is this a an ext serious problem?



See more: What Does It Mean To Have Soft Eyes '? Seeing With Soft Eyes

The PASS-Key(R) II device controls the "SECURITY" indicator. In normal operation, the PASS-Key(R) 11 module controls the desk lamp only when the ignition is ON. Over there are 4 PASS-Key(R) II mechanism bulb settings as follows.Bulb Check. When the ignition is very first turned on, the SECURITY" indicator illuminates for around five secs to suggest the system is operating correctly. Describe the adhering to bulb symptoms, if the bulb examine does no operate. Bulb stays Illuminated and also Engine Starts. If the "SECURITY" indicator stays illuminated after the engine starts, this is one indication that the PASS-Key II module is reading an open, short or untrue resistance value. Verify the the PASS-Key II module link at the basic of the steering pillar is properly connected and that a good ignition an essential is gift used. Bulb continues to be Illuminated and also Engine Does not Start. If the "SECURITY" indicator continues to be illuminated while and after attempting to start the engine and also the engine does no crank or start, this suggests that the PASS-Key II module has actually sensed an improper crucial value and has disabled the engine and collection the disable timer. This particularly does not median that the vital sense circuit is open up or shorted come chassis ground, describe "Bulb Flashes and Engine Does not Start." See: Testing and also Inspection eliminate the key from the ignition and also verify the is the correct vital code for the vehicle. The vital code may be checked utilizing J 35628-A and comparing the crucial code to the of other tricks for the vehicle. ~ waiting about 3 minutes for the disable time to expire and also the "SECURITY" indicator to go out, shot to start the engine v a known good key with the proper an essential code. Bulb Flashes and also Engine Does not Start. If the "SECURITY" indicator flashes when per 2nd and the engine does not start, this shows that the PASS-Key II module sensed an open, a quick or otherwise invalid (value suitable none that the obtainable 15 key codes) input indigenous the ignition key resistor input. The PASS-Key II module walk not start the disable timer during this operation mode. This operation mode could likewise be caused by a malfunctioning power or floor circuits.